PMASUP236B: Operate vehicles in the field

The new unit code is PMASUP236B Operate Vehicles in the Field (previously PMASUP236A).
Course Duration: 2 Days Minimum (16 Hours)

This course refers to the operation of vehicles on the pipeline easement/access roads and off road terrain.  This course meets the requirements of operating a light vehicle on a gas sites.

Australian 4WD has developed a two day advanced driver training program that incorporates two of our most popular courses from the Transport and Distribution and Outdoor Recreation competencies.

Australian 4WD and Advanced Driver Education are committed to assist gas / oil / mining / construction companies, contractors and visitors to eliminate or minimise the risk of fatalities, injuries and incidents arising from the use of vehicles by defining the requirements for operating and travelling in vehicles on the gas / oil / mining sites and on public and private roads used to access the these sites. Avoiding accidents and unnecessary vehicle repairs will affect the ability of each gas / oil / mining /construction site and contractors to meet their targets.

Light vehicles have been involved in a significant proportion of fatal and high potential incidents. Identified causes and contributing factors include:

 Elements of Competency

Prepare vehicle and secure load
1.1   Conduct vehicle familiarisation checks before starting journey.
1.2   Note and rectify any defects where possible or report vehicle for further attention/repair.
1.3   Ascertain that all required fuel, water and other supplies required for the journey are available and in useable order.
1.4   Inspect all ancillary equipment and operational accessories to ensure they have been attached or secured in a safe and agreed manner.
1.5   Secure load including external loads, rear tray, roof racks, and any loads within the vehicle, using appropriate securing equipment.

Undertake journey
2.1   Familiarise oneself with the route to ensure that an appropriate route has been determined.
2.2   Interpret access manuals and topographical maps in order to obtain required information for journey.
2.3   Obtain relevant authorisations/notifications and accesses before starting the journey.2.4  Confirm and/or clarify or communicate journey details with relevant company personnel.
2.5   Monitor driving conditions and requirements constantly, to meet any changes in terrain, weather conditions and road conditions and requirements.
2.6   Monitor and maintain fluid levels and air pressures to ensure safe and efficient vehicle operations.
2.7   Monitor vehicle constantly for any malfunctions or factors that may affect vehicle performance.
2.8   Maintain vehicle speeds within all stated limits and road condition limitations to minimise the risk of personal injury, environmental damage and load damage.
2.9   Maintain communication as required with the relevant company personnel to advise of progress and journey status.
2.10 Ensure seatbelts are worn by all personnel while the vehicle is in motion.

Operate vehicle
3.1   Knowledge of vehicle differences to the driving requirements of 4WD and conventional vehicles.
3.2   Adhere to general principles of 4WD in negotiating a variety of terrains and driving conditions.
3.3   Use defensive driving techniques.
3.4   Observe additional precautions for night driving.
3.5   Drive to suit road conditions.
3.6   Observe rules prohibiting driving under the influence of alcohol and other performance inhibiting substances.

Finalise journey
4.1   Communicate and confirm termination of journey with the relevant company personnel.
4.2   Visually inspect the vehicle to ensure that vehicle is in good repair and order.
4.3   Unsecure trailer loads and prepare for unloading utilising the agreed uncoupling process.
4.4 Report faults or damage to vehicle to appropriate personnel.

Recover vehicle
5.1   Identify and assess options for recovery of an immobilised vehicle.
5.2   Operate recovery equipment safely.
5.3   Perform a battery 'jump start' safely.
5.4   Observe safety precautions when rigging cables and chains.
5.5   Demonstrate various methods of vehicle recovery.
5.6 Change a wheel on a properly jacked vehicle.

Maintain vehicle safety
6.1   Observe appropriate speeds for the road conditions.
6.2   Ensure all personnel use a seat belt.
6.3   Observe site specific vehicle entry restrictions.
6.4   Follow appropriate search and rescue notification procedures.
6.5   Follow appropriate procedures for passing large or heavy vehicles.

When:
On request.

Where:
site specific (Your site or ours).
Kurwongbah, North of Brisbane or site specific
Roma, Chinchilla, Gladstone, Townsville, Mackay, Rockhampton, Murwillunbah, Cairns.

Corporate or Group Bookings
We can plan and conduct group or corporate specific courses, on request.  Please contact us for further information.

Includes:
Training Handbook and Statement of Attainment.
Driver only receives Accreditation.
Ongoing advice and support.

Return to homepage for more information about 4WD Training.